Magnetic drive pump without seal, can achieve zero leakage, especially suitable for conveying flammable, explosive, corrosive liquid. It is used to require that the pump can only leak or even not leak the occasion.
Features:
ETFE (carbon-fiber reinforced) wetted-end material.
Flow rates up to 830 L/min and discharge head of 34m.
Able to handle many types of chemical and temperature up to 90 ℃.
Available in flange connections.
Specification:
Model
352PW-F
Specific Gravity
1.2
Frequency
50Hz, 60Hz
Pump performance at specific point
50Hz
23-100
60Hz
27-100
Motor Output
2 HP (1.5 kW)
Flange Size
32 mm (outlet); 32 mm (inlet)
Casing Material
ETFE
Shaft Material
ceramic
Bearing Material
carbon
O-ring Material
FKM
Interface Mode
thread, flange
Structure:
Dimension (Unit: mm)
Model
W
H
L
a
b
c
d
e
f
352PW-F
160
242
505.5
222.5
132
155
130
120
78
Tips: Can Magnetic Drive Pump Runs Dry?
One of major limitations of magnetic drive pumps is the risk associated with running dry. Because the pumped liquid will act as lubricant and coolant, in case of dry run, the bearing and some other parts could overheat and eventually become damaged. However, some magnetic drive pumps are designed to handle short periods of dry running, but it’s essential to check the specifications before operating the pump without liquid.
