0.5 hp pool pump with cheap price for sale. Pool pump adopts 100% copper motor. The medium temperature of swimming pool submersible pump between 5 ℃ and 50 ℃.
Feature:
Magnificent flow rate and lift, the core energy of water circulating, 2-3m suction lift.
Free-tool filter cover design, easy to maintenance.
IP55 protection level, with none-leaky design.
100% copper wire motor, 24 hours running.
Silicone sealing ring, cover all watering section, enhance pump sealing system.
Engineering plastic body, pump can be effectively protected under bad weather, long service life.
Anti rust cast-aluminum motor cover,fast heat dissipation; PPO plastic steel material impeller, resist high temperature and corrosion.
Specification:
Model: ATO-FQS-370
Voltage: 220V (1 or 3 phase) / 380V (3 phase)
Frequency: 50 Hz / 60 Hz
Power: 0.5 HP (0.37 kW)
Hmax: 8m
Qmax: 11 m3/h
Port Size: 50 mm
Motor: copper motor
Medium Temperature: 5 ℃ – 50 ℃
Protection Level: IP55
Weight: 10 kg
Certification: CE
Dimension (Unit: mm)
Structure:
01: plastic spanner
02: lid lock ring
03: lid
04: O’ ring
05: basket
06: union nut
07: union bushing
08: O’ ring
09: pump body
10: O’ ring
11: drain plug
12: nut
13: gasket
14: screw
15: base
16: O’ ring
17: screw
18: diffuser
19: impeller
20: O’ ring
21: shaft seal
22: flange
23: screw
24: flange
25: R ejection water ring
26: screw
27: motor
28: junction box
29: electric current safeguard
Flow Diagram:
Tips: How to Use Pool Pump?
Before use, check whether the bolts are loose and the power cables and plugs are intact.
In order to prevent electric shock accident, it is necessary to install leakage circuit breaker or electric shock security device and other corresponding security measures.
The working voltage range of the pump must be +10%, -10% of the rated voltage, otherwise long-term use will make the motor coil hot, the motor service life is shortened or caused by burning. If the electric pump is far away from the power supply, the power supply line should be thickened appropriately, otherwise the voltage will be used to drop and cannot run.
Close the power switch, make the pump idle for about 2 minutes, check the start, operation is normal, steering is correct.
